First, insulation mortar Guilin Dragon aerated concrete block specific material of polymer cement mortar Plastering Introduction: 
 "Dragon Brand" DQ712 aerated concrete block special polymer cement surface mortar is to absorb advanced technology developed by the German high-tech products, with high-quality cement and admixtures prepared from a variety of new multi-function polymer modified cement-based composite materials. It is a fundamental solution to the long-standing building wall leakage, cracking and other issues, in particular to address the aerated concrete block and other new puzzle lightweight materials caused by water absorption is not strong interface bonding, building roof low adhesion strength and wall plaster, plaster layer appear hollowing, cracking, and the leakage and other defects. 
 Second, Guilin, Guangxi, insulation mortar Dragon aerated concrete block special polymer cement mortar Plastering main features: 
 1, with excellent adhesion, especially for smooth aerated concrete blocks or other concrete wall can achieve the desired bond strength to overcome the ordinary Plastering cement mortar bond is not strong there, from the dark, brick slurry separation defects, which greatly improved the building wall surface decorative adhesive strength again. 
 2, with good bending and compression, to overcome the ordinary cement mortar Plastering crisp, easy to crack and other defects, which greatly improves the surface strength of masonry walls. 
 3, has good water resistance, high temperature and other properties for moisture, temperature changes of the environments. 
 Third, Guilin, Guangxi, insulation mortar Dragon aerated concrete block special polymer cement mortar Plastering scope: 
 This product is suitable for aerated concrete blocks, lightweight foam concrete blocks, concrete hollow blocks and other blocks of plaster. 
 Fourth, Guilin, Guangxi, insulation mortar Dragon aerated concrete block special polymer cement surface mortar performance indicators: 
 Project performance indicators 
 Tensile bond strength (MPa) 
 (With cement mortar) at room temperature normal ≥ 0.70 
 Temperature ≥ 0.50 
 Operating time h ≥ 2 
 Flexible cement-based: 2.8d pressure off ratio (compressive / flexural strength) ≤ 3.0 
 Crack resistance (thickness 5mm or less) no cracks 


 Fifth, Guilin, Guangxi, insulation mortar Dragon aerated concrete block special polymer cement surface mortar to use: 
 1, with 1 part water plus 5-6 copies DQ712 (weight ratio) and mix, put it aside for about 10 minutes to use. 
 2, the wall surface in cleaning grease, dust, loose material, the water can not be Plastering operation. 
 3, the plaster layer thickness generally 5-10mm thickness suitable (8-15kg / m). 
 4, the solidification process of natural plaster conservation without the need spray maintenance, no shrinkage cracking. 
 5, the water surface mortar Hunban DQ712 process, such as the water too much, not too much water will be drained, can be adjusted to desired consistency then add DQ712; shall not DQ712 soaked in water, cement and non-coupled sand mix. 

 Sixth, insulation mortar Guilin Dragon aerated concrete block polymer cement surface mortar dedicated storage and packaging: 
 1, the products are non-dangerous goods, non-toxic, tasteless, do not pollute the environment. But requires a solid sealed package, non-contact with rain, collision or sharp objects to prevent damage to bags. 
 2, should be stored in a cool, dry warehouse, avoid prolonged exposure to air. 
 3, the product shelf life 6 months, do not use expired products. 
 4, sub-25kg / bag, 50kg / bags in two pack.